Graphical Instructions

1. Double-click the My Computer icon on your desktop. If you see a folder named Dial-Up Networking, go to step 6.

2. To install Dial-Up Networking, click Start, point to Settings, click Control Panel, and double-click the Add/Remove Programs icon.
   Note: You may be prompted for your Windows 95 CD or diskettes. Please have these available before you begin the installation of Dial-Up Networking.

3. Click the Windows Setup tab, and double-click Communications.

4. Place a check in the box beside Dial-Up Networking. Click OK, click OK, and close the Control Panel window.

5. Restart your computer.

6. Click Start, point to Settings, click Control Panel, and double-click the Network icon.

7. Look at the list of Installed Components. If you see TCP/IP (or TCP/IP -> Dial-Up Adapter), go to Step 14.

8. Click Add, and double-click Protocol.

9. Under the list of "Manufacturers", select Microsoft, and under the list of "Network Protocols", select TCP/IP. Click OK.

10. Below the window of installed components, select Windows Logon for "Primary Network Logon".
    Note: If prompted to identify yourself to Windows, click the Identity tab and fill in your username for "Computer Name", and type home as your "Workgroup".

11. Click OK, and close the Control Panel window.

12. Restart your computer.

13. Double-click the My Computer icon, and double-click Dial-Up Networking. (If you have an Intrex.Net icon already, skip to step 17.)

14. Double-click Make New Connection.

15. For the name of your connection, type Intrex.Net. Click Next.

16. You will need to enter the dialup number for your area. Please choose the dialup access number that is a local call from your location. Intrex.Net is not responsible for any long distance charges. Click Next, and click Finish.

17. Right-click the Intrex.Net connection, and click Properties.

18. Uncheck Use area code and country code (or Use area code and dialing properties).

19. Click the Server Types tab.

20. Clear all the checkboxes except TCP/IP. Click TCP/IP Settings.

21. Select Specify Name Server Addresses, and enter 209.42.192.253 for "Primary DNS" and 209.42.192.252 for "Secondary DNS".

22. Click OK, and click OK.

23. Right-click Intrex.Net, and click Create Shortcut.

24. Click Yes when it asks if you want it to be placed on the desktop, and close any open windows.

25. To connect to Intrex.Net, simply double-click the Intrex.Net connection.

26. Fill in the information for your username and password, and click Connect.
    Note: If you are connecting through a Nationwide access number, enter username@intrex.net rather than just your username.